The fishing reel is one of the most essential accessories when you start fishing in general. After a while, you need to maintain it so that it remains functional. This task requires a precise set of actions to be carried out properly.
Dismantle everything properly
The casting reel will have a number of components that all play a key role. To keep everything in good condition, it is important to dismantle the device carefully. The key is that you are able to reassemble the whole thing once you have completed the required action. Having a plan of your reel model can be a great help.
Another possible action is to film yourself taking it apart. Then, to reassemble it, you can simply watch this video in reverse. For small items that can get lost, such as screws, use a small container for temporary storage.
Replace worn parts when necessary
For casting reel models that have been used a lot, some of the parts inside may be worn out. They may still work at the time, but they may break at the worst possible moment. If you notice such a problem, you can take action right away.
You need to note the part number of your reel and then look for the corresponding parts. By using the part number, you can be sure that the parts you buy will fit your reel. Otherwise, they may not fit once you’ve bought them.
Cleaning the parts
Dust is one of the things you’ll need to take care of when cleaning your casting reel. This will get stuck deep into the gears, and can cause problems with operation if not properly dislodged. You can use a dry cloth to remove this properly.
As for dirty grease, you can recognize it by its blackish colour. Its natural colour will be close to green, and when it is not, it must be removed. This can be done very effectively with a fine brush.
Replacing the oil and grease
Once the various parts of your casting reel are clean, you will need to replace the grease and oil where it is needed. The grease will mainly affect the various mechanisms, which are larger than the gears. The application of the grease is done with a fine brush, just as it is done to remove it.
You should not put grease on gears, as they are not designed for it. Instead, simply add a few drops of oil when the unit is in position. Check that the whole thing is spinning properly before you close your reel. Once this is done, you can go fishing without fear.